1. Openssl Generate Certificate With Extended Key Usage Does Not Permit Use For Tls Server Authentication
2. Openssl Generate Certificate With Extended Key Usage Calculator
3. Openssl Create Private Key
4. Openssl Create Csr With Extended Key Usage

The ownca provider is intended for generating OpenSSL certificate signed with your own CA (Certificate Authority) certificate (self-signed certificate). Many properties that can be specified in this module are for validation of an existing or newly generated certificate. When you create the OCSP key & certificate, your sample code uses the opensslserver.cnf (which you don't introduce until the next article) but when you sign the certificate you use the opensslintermediate.cnf. Does it matter if you switch between the two? Is there that much difference between the two config files? X509v3 Key Usage: critical Digital Signature X509v3 Extended Key Usage: critical Code Signing. Ensure certificate validity. Each one of these certificate generation techniques have very specific use cases and one certificate request should not be used for all three use cases even though it is technically possible. The certificates that was generated is not configured with the SSL Client option, so something with the easy-rsa configuration is not correct. What should I do to generate the correct certificate? You can try to fix the easy-rsa tool, or you can use openssl directly. You will need access to the CA signer's key to do this with openssl.

OpenSSL is a robust, commercial-grade, and full-featured toolkit on the Linux that can be used for a large variety of tasks related to Transport Layer Security (TLS) and Secure Sockets Layer (SSL) protocols. It is also a general purpose cryptography library. It is licensed under an Apache-style license, which basically means that you are free to get and use it for commercial and non-commercial purposes subject to some simple license conditions.

It is already installed out of the box on the most linux distributions or available in the trusted package repositories. OpenSSL has been kind of standard in the open source domain to work with SSL and TLS protocols. If for some reason, it is not already installed, you can install it by using your distribution specific commands.

In this blog post, we’ll learn quick OpenSSL commands that can be used to solve common everyday scenarios. There might be edge scenarios as well, but the intention is not to cover those. So it includes basic scenarios like generating private keys, certificate signing requests, and certificate format conversion. It also assumes that you are already aware of basic concepts of PKI.

I'm using openssl on Mac OS X 10.9 to generate a self-signed certificate for Windows Server Remote Desktop Services. How to add extended key usage string when. Generate certificate signing request (CSR) with the key Using the private key generated in the previous step, we need to create a certificate signing request. You can generate the certificate signing request with an interactive prompt or by providing the extra certificate information in the command line arguments.

About Certificate Signing Requests

Certificate Signing Requests aka CSR are the files which contains basic information about your infrastructure and public key of a key pair. Private key of the key pair is limited to yourself only. It is used by Certificate Authority aka CA to issue certificates. Both of these components are inserted into the certificate when it is signed.

So in order to generate a certificate, one needs atleast two critical pieces: a private-public key pair and a CSR. Whenever you generate a CSR, you will be prompted to provide information regarding the certificate. This information is known as a Distinguised Name (DN). An important field in the DN is the Common Name (CN), which should be the exact Fully Qualified Domain Name (FQDN) of the host that you intend to use the certificate with.

The other items in a DN provide additional information about your business or organization. If you are purchasing an SSL certificate from a certificate authority, it is often required that these additional fields, such as “Organization”, accurately reflect your organization’s details.

Here is an example of what the CSR information prompt will look like:

Country Name (2 letter code) [AU]:IN
State or Province Name (full name) [Some-State]:Maharashtra
Locality Name (eg, city) []:Pune
Organization Name (eg, company) [Internet Widgits Pty Ltd]: My Organization, Inc
Organizational Unit Name (eg, section) []:Digital Marketing
Common Name (e.g. server FQDN or YOUR name) []:mywebsite.com
Email Address []:admins@myorg.com

If you want to non-interactively answer the CSR information prompt, you can do so by adding the -subj option to any OpenSSL commands that request CSR information. Here is an example of the option, using the same information displayed in the code block above:

-subj “/C=IN/ST=Maharashtra/L=Pune/O=My Organization, Inc/CN=phoenix.myorg.com”

It is also possible to skip the interactive prompts when creating a CSR by passing the information via command line or from a file.

Generate CSR

As discussed above, CSRs are needed to request SSL certificates from a certificate authority. Also we need to keep in mind that you may add the CSR information non-interactively with the -subj option, mentioned in the previous section.

Generate a Private Key and a CSR

This is the simplest and most common requirement. You first need to generate a public private key pair and also a CSR. The CSR thus generated can be used by Certificate Authority (CA) to produce a SSL certificate. This SSL certificate can then be used to secure the traffic incoming and outgoing from your server.

Below command creates a 2048-bit private key (mywebsite.key) and a CSR (mywebsite.csr) from scratch:

openssl req
-newkey rsa:2048
-nodes
-keyout mywebsite.key
-out mywebsite.csr

Once above command is input, OpenSSL will prompt few basic questions to fill the Organization specific information. You’ll need to provide the same for it to get completed.

The -newkey rsa:2048 option specifies that the key should be 2048-bit, generated using the RSA algorithm. The -nodes option specifies that the private key should not be encrypted with a pass phrase. The -new option, which is not included here but implied, indicates that a CSR is being generated. If your CA supports SHA-2, add the -sha256 option to sign the CSR with SHA-2.

At end of this command, you’ll have two files created in the current working directory. One of them will have .key extension, which is the private key part of the key pair. Second one will have .csr extension, which is the CSR.

Generate CSR from an existing Private Key

You may already have an existing key pair with you and you would like to use the same for requesting certificate. In this case, you can use below command:

openssl req
-key mywebsite.key
-new
-out mywebsite.csr

Again, once above command is input, OpenSSL will prompt few basic questions to fill the Organization specific information. You’ll need to provide the same for it to get completed.

The -key option specifies an existing private key (mywebsite.key) that will be used to generate a new CSR. The -new option indicates that a CSR is being generated.

Generate CSR from an existing Certificate and Private Key

This method can be used if you want to renew an existing certificate but you or your CA do not have the original CSR for some reason. In fact, most of the Certificate Authority do not store this information. It basically saves you the trouble of re-entering the CSR information, as it extracts that information from the existing certificate. In this case, you can use below command:

openssl x509
-in mywebsite.crt
-signkey mywebsite.key
-x509toreq
-out mywebsite.csr

The -x509toreq option specifies that you are using an X509 certificate to make a CSR.

About Certificates and Self Signed Certificates

To get your certificate signed by 3rd party Certificate Authority, you need to undergo a certain process and pay some money in lieu of their service. If your servers are in the public domain or your service is public facing, then you need to get your certificate signed by well known CAs which are accepted by major browsers and Operating Systems.

It may happen that you do not want to undergo this process for one or the other reasons, then a valid and accepted solution is to sign your own certificates. This is particularly helpful during the development and testing stages of software lifecycle.

When you issue yourself a certificate, it is called as a self-signed certificate. A self-signed certificate is a certificate that is signed with its own private key. Self-signed certificates can be used to encrypt data just as well as CA-signed certificates, but your users will be displayed a warning that says that the certificate is not trusted by their computer or browser.

Therefore, self-signed certificates should only be used if you do not need to prove your service’s identity to its users (e.g. non-production or non-public servers). More often than not, you would be end up using self signed certificates and most probably reading this blog post just for that.

Generate Self-Signed Certificate

Below command can be used to create a 2048-bit private key (mywebsite.key) and a self-signed certificate (mywebsite.crt) in one go:

openssl req
-newkey rsa:2048
-nodes
-keyout mywebsite.key
-x509
-days 365
-out mywebsite.crt

You’ll need to answer the questions prompted to complete the process.

The -x509 option tells req to create a self-signed cerificate. The -days 365 option specifies that the certificate will be valid for 365 days. A temporary CSR is generated to gather information to associate with the certificate.

Generate a Self-Signed Certificate from an existing Private Key

Below command can be used to generate a self signed certificate if you already have a private key:

Cat electronic technician key generator. openssl req
-key mywebsite.key
-new -x509
-days 365
-out mywebsite.crt

You’ll need to answer the questions prompted to complete the process.

The -x509 option tells req to create a self-signed certificate. The -days 365 option specifies that the certificate will be valid for 365 days. The -new option enables the CSR information prompt.

Generate Self-Signed Certificate from an existing Private Key and CSR

Below command can be used to create a self-signed certificate (mywebsite.crt) from an existing private key (mywebsite.key) and (mywebsite.csr):

openssl x509
-signkey mywebsite.key
-in mywebsite.csr
-req
-days 365
-out mywebsite.crt

Since CSR already stands generated, there will be no prompts for asking Organization specific information.

The -days 365 option specifies that the certificate will be valid for 365 days.

View and Verify Certificates, CSR and Keys

Certificate and CSR files are encoded in PEM format, which is not human-readable. Therefore, in order to verify that our CSR/Certificate contains the intended information, openssl provides certain commands.

View CSR Entries

Below command allows you to view and verify the contents of a CSR (mywebsite.csr) in plain text:

openssl req
-text -noout -verify
-in mywebsite.csr

View Certificate Entries

Below command allows you to view the contents of a certificate (mywebsite.crt) in plain text:

openssl x509
-text -noout
-in mywebsite.crt

Verify a Certificate was Signed by a CA

Below command can be used to verify that a certificate (mywebsite.crt) was signed by a specific CA certificate (ca.crt):

openssl verify
-verbose -CAFile ca.crt mywebsite.crt

Verify a Private Key

Below command can be used to check that a private key (mywebsite.key) is a valid key:

openssl rsa
-check
-in mywebsite.key

If your private key is encrypted, you will be prompted for its pass phrase. Upon success, the unencrypted key will be output on the terminal.

On a related note, below command can be used to generate a private key:

openssl genrsa
-des3
-out mywebsite.key 2048

Openssl Generate Certificate With Extended Key Usage Does Not Permit Use For Tls Server Authentication

Enter a password when prompted to complete the process. You can also choose to leave it empty.

Verify a Private Key Matches a Certificate and CSR

Below commands can be used to verify if a private key (mywebsite.key) matches a certificate (mywebsite.crt) and CSR (mywebsite.csr):

openssl rsa -noout -modulus -in mywebsite.key openssl md5
openssl x509 -noout -modulus -in mywebsite.crt openssl md5
openssl req -noout -modulus -in mywebsite.csr openssl md5

If the output of each command is identical there is an extremely high probability that the private key, certificate, and CSR are related.

Convert Certificate Formats

Up until now, we have been working with certificates which pertains to X.509 format which encodes information in ASCII format. There are other variety of certificates which are used to encode and decode this information. Some of the applications might require you to provide the certificate in a specific format over others.

Also to be noted that many of these formats can contain multiple items, such as a private key, certificate, and CA certificate, in a single file.

OpenSSL can be used to convert certificates to and from a large variety of these formats.

Convert PEM to DER

Below command can be used to convert a PEM-encoded certificate (mywebsite.crt) to a DER-encoded certificate (mywebsite.der), a binary format:

openssl x509
-in mywebsite.crt
-outform der
-out mywebsite.der

The DER format is typically used with Java.

Convert DER to PEM

Below command can be used to convert a DER-encoded certificate (mywebsite.der) to a PEM-encoded certificate (mywebsite.crt):

openssl x509
-inform der
-in mywebsite.der
-out mywebsite.crt

Convert PEM to PKCS7

Below command can be used to add PEM certificates (mywebsite.crt and ca-chain.crt) to a PKCS7 file (mywebsite.p7b):

openssl crl2pkcs7
-nocrl
-certfile mywebsite.crt
-certfile ca-chain.crt
-out mywebsite.p7b

Note that you can use one or more -certfile options to specify which certificates to add to the PKCS7 file.

PKCS7 files, also known as P7B, are typically used in Java Keystores and Microsoft IIS. They are ASCII files which can contain certificates and CA certificates.

Convert PKCS7 to PEM

Openssl Generate Certificate With Extended Key Usage Calculator

Below command can be used to convert a PKCS7 file (mywebsite.p7b) to a PEM file:

openssl pkcs7
-in mywebsite.p7b
-print_certs
-out mywebsite.crt

Note that if your PKCS7 file has multiple items in it (e.g. a certificate and a CA intermediate certificate), the PEM file that is created will contain all of the items in it.

Convert PEM to PKCS12

Below command can be used to take a private key (mywebsite.key) and a certificate (mywebsite.crt), and combine them into a PKCS12 file (mywebsite.pfx):

openssl pkcs12
-inkey mywebsite.key
-in mywebsite.crt
-export -out mywebsite.pfx

You will be prompted for export passwords, which you may leave blank. Note that you may add a chain of certificates to the PKCS12 file by concatenating the certificates together in a single PEM file (mywebsite.crt) in this case.

PKCS12 files, also known as PFX files, are typically used for importing and exporting certificate chains in Micrsoft IIS.

Convert PKCS12 to PEM

Openssl Create Private Key

Below command can be used to convert a PKCS12 file (mywebsite.pfx) and convert it to PEM format (mywebsite.combined.crt):

openssl pkcs12
-in mywebsite.pfx
-nodes
-out mywebsite.combined.crt /brain-wallet-private-key-generator.html.

Note that if your PKCS12 file has multiple items in it (e.g. a certificate and private key), the PEM file that is created will contain all of the items in it.

Openssl Create Csr With Extended Key Usage

Above commands should cover how most people use OpenSSL to deal with SSL certs.